Gas - Resources

Gas - Resources

First Burn

It's important to cure your stove the first time you use it. Your installer should go over this with you in detail at time of installation. Here are some quick guidelines when curing a new fireplace. 

  • The first fire in your heater is part of the paint curing process. To ensure the paint is properly cured, it is recommended you burn your fireplace for at least four (4) hours the first time.

  • When first operated, the unit will release an odor caused by the curing of the paint and the burning off of any oils remaining from manufacturing. Smoke detectors in the house may go off at this time. Open a few windows to ventilate the room for a couple of hours. A film can build up on the glass upon your initial break-in of the unit. This is normal, resulting from the curing process of the paint and logs. The glass should be cleaned after the first 4 to 6 hours of initial burning to remove these deposits before they bake on.

  • The glass may require cleaning.

  • NOTE: When the glass is cold and the appliance is lit, it may cause condensation and fog the glass. This condensation is normal and will disappear in a few minutes as the glass heats up.

  • DO NOT ATTEMPT TO CLEAN THE GLASS WHILE IT IS STILL HOT!
  • DO NOT BURN THE UNIT WITHOUT THE GLASS DOOR IN PLACE.
Share by: